Thursday, February 18, 2010

Implementing NX CAM Software



In our last post, we told you about our recent success in delivering a tooling order to a customer in record time. While there are many reasons that we were able to exceed our customer’s expectations, without a doubt the biggest factor was our recent CAD/CAM software upgrade. While the whole process is fairly complicated, we thought we might share some of the developments on the manufacturing side, and demonstrate how they have helped us reduce tooling delivery times.

Commodore’s recent investment in new 3D modeling software from Siemens PLM has been a major step forward for our tooling design department. The implementation of the NX (formerly called UniGraphics) software has delivered increased productivity and accuracy in our tooling design process. Now that we have made our way through the learning curve on the design side, we have begun to realize some benefits on the manufacturing side.

Our CNC programmers have transformed their NC programming and machining processes, reducing waste and increasing productivity. Utilizing feature based machining, NX automatically creates the CNC programs directly from part design models. Process templates and wizards ensure the use of preferred and proven tooling and machining methods. According to our senior programmer, Dave Simmons, “The programming of tool paths to be used on the CNC equipment has become more efficient. We are saving time on programming, and at the machine.”

Another great feature of NX that helps our productivity is machining simulation. Once the program is complete, NX gives us the ability to take it and immediately replay the tool path to simulate material removal. This allows the programmer to verify that the machine tool will be creating the exact part required before the program is actually run. This feature all but eliminates costly damage that can occur when there are errors in the program.

All of these time savings are beneficial in providing thermoformer tooling to our customers at competitive prices, within a very small delivery window.

Thursday, February 11, 2010

Custom Tooling in Seven Days

Commodore recently completed what we believe to be our fastest delivery to date on a custom meat tray mold and trim tool - seven working days!

Yes, seven days from concept to delivery of platen-ready tooling for a Comco 730-28 Thermoformer. It took a coordinated effort and lots of hard work, but we managed to do what for most would not be possible. Although this project went extremely well, the ability to pull off this feat certainly did not happen overnight.

Commodore is constantly looking for, and investing in, ways to improve our processes. From our recent Unigraphics CAD/CAM upgrade, to our 5S implementation on the shop floor, from the improved internal communication to outstanding relationships with our key vendors, we are always looking for ways to create the products you need as efficiently as possible. While it is very satisfying to see the results of our efforts, we will never be satisfied with the status quo.

Congratulations to the entire team for coming together and delivering!

Wednesday, January 20, 2010

Commodore Plastics Receives "Superior" Plant Rating from AIB!

Commodore Technology's sister company, Commodore Plastics, recently earned a "Superior" plant rating from the AIB International Consolidated Standard for Food-Contact Packaging Facilities Program.

AIB International is committed to protecting the safety of the food supply chain. Through rigorous inspections, superior audits and training, and shared expertise AIB empowers clients to lower their business risk and strengthen their reputations. Learn more about AIB here: www.aibonline.org

Congratulations to the entire team here at Commodore for your efforts in making Commodore a world-class facility that we can all be proud of!



Thursday, December 10, 2009

Fadal VMC 6030 Renovation

When it comes to making tooling for the EPS foam industry, Commodore excels at creating detailed designs so our customers can make the highest quality products possible. As we complete the engineering phase and begin with manufacturing, accuracy is among the most important factors in regard to creating a productive tooling set.

Keeping our machine tools in good working condition is an ongoing commitment for Commodore Technology. In fact, just last month we spent a considerable amount of time servicing one of our Fadal CNC machines, a VMC6030.

After the 1991 fire that devastated our facility, we recognized that we had a major task ahead of us in rebuilding our foam plant. One of the biggest challenges that we anticipated was replacing all of the foam tray tooling that was lost in the fire. Commodore bought the VMC6030 from Mid-Atlantic CNC and moved it into our newly rebuilt shop. Needless to say, our Fadal performed as expected and was instrumental in our efforts to get back in to the foam business. However, after tens of thousands of machine hours, it was becoming apparent that the machine was no longer running to its original accuracy of +/- 0.0005". Recently we had been reduced to limiting the use of this machine to making parts that do not require a high degree of accuracy. As mold making was no longer possible, the decision to renovate the machine was made.

Over a three week period, our employees and a technician from Machine Tool and Research tore apart, serviced, painted, and rebuilt the Fadal. We replaced bearings, scrapers, installed a new lubrication system, and replaced the bearing surfaces on the table and saddle. We even replaced the polycarbonate windows in the doors. Although it may need an updated machine control in the future, the maintenance extended the life of the machine, and better yet, our old VMC 6030 is now more accurate than when it was new!


Eric Vogel running the newly refurbished VMC6030

Friday, October 9, 2009

Comco SX-28 Thermoformer

Summer has turned to fall, and things have been busy at Commodore. Sorry for the lack of updates, I am guilty of procrastination...until now.

If you have been following my posts, you know about our newest thermoformer, the SX-44. In the last few months we have been working on the design of the next SX generation machine, the SX-28. This former fills out our product line with a machine that offers high production rates at an affordable price.

All of the specifications have been defined, and design work has begun. Here is a preliminary view of the machine from our Unigraphics design software.



This machine promises to be the next step in combining simplicity, reliability and value in a foam thermoformer. Check back soon for more information.

Fritz

Thursday, July 23, 2009

It's Been Awhile...

Sorry for the lack of updates lately. After all of the details that were involved in sending out the new SX-44, and then the final prep for NPE 2009, it was an awfully busy time. Once all of that was behind us, a little break was called for.

At any rate, despite the lack of blog posts, things have continued to move along here in Bloomfield. Since my last post, we have shipped out another SX-16 thermoformer, done the lion's share of a rebuilding job on a customer's older Comco 730-28 former, and continued work on some tooling orders.

Thanks to those of you that visited us at NPE in Chicago last month. It was great to see some familiar faces, as well as make some new friends. The booth looked great, and our video of the SX-44 was a hit. I'm not sure what was more impressive, the thermoformer itself, or the overall quality of the video production. Special thanks to Doug at Blackbird Son Production Service for the outstanding job on the video. If you have not had a chance to see it, you can view it below, or take a look here. We had an enjoyable show, and despite the obvious light attendance, we consider it a success.



The most exciting development of the past month is that we will be rounding out the SX line of thermoformers, bringing the much-anticipated SX-28 to fruition. This former will offer high-end perfomance and features at a low-end price. Stay tuned for updates on our progress through the summer and fall.

That's all for now, thanks for reading!

Fritz

Tuesday, June 16, 2009

A Job Well Done!

Wow, it's the middle of June already. No blogging lately, it has been a low priority during a busy time.

The news that I want to share with the world is that the SX-44 thermoformer is done and gone. It is always a good day when a large order gets packed up; the sense of accomplishment that we feel as an organization is always evident when we ship. In this case, however, there was more to it than that. The overall feeling of pride in a job well done was apparent throughout the shop yesterday. With the first SX-44, Commodore committed to a huge project, and the overwhelming sentiment is that we designed and built an amazing piece of equipment.

Thanks to all of the men and women of Commodore for coming together - what we accomplished was a real team effort that we should all be proud of. From the machine and tooling designers, to the machine shop guys, from the production planners to the assembly department, everybody came together and did their part. Hats off to each and every one of you!

Check back soon for a preview of the video we are creating to showcase this new thermoformer. It will up before NPE starts in six days!

Fritz