Wednesday, April 29, 2009

Details, details, details...

Hello there, time for another update. It has been a few weeks since I have posted, but progress on the new thermoformer and trim press continues at an amazing pace. At this point, all of the major components are in place on the machine, most notably the oven and the chainrails. The electricains have been wiring the panels to the machine, tweaking the programs and testing components.

The next couple of weeks will be all about the details. We have to continue to tie in all of the systems, and then it will be on to testing. We look forward to running some foam through the machine so we can get some video footage to show you!

Here's a view of the former from the oven end:

From SX-44 Photos


And one from the side:

From SX-44 Photos


The main electrical panel:

From SX-44 Photos


That's all for now, please check back soon!

Tuesday, April 14, 2009

Taking Shape

The SX-44 thermoformer is really starting to come together now. It's great to see the results after all of the hard work that has gone in to this machine. Take a look:

Pat assembling the form station:


Thermoformer with form station, hydraulic unit and lower oven frame:


A female mold:


And a male mold:

Thursday, April 2, 2009

April in Bloomfield

Well, April is here, and we are feeling a healthy dose of optimism that comes with a new spring season in upstate New York. Besides the optimism that the nice weather brings, we are extremely optimistic about our new thermoformer.

The SX-44 project is coming together, with visible progress occurring daily. The frame is complete and in the paint booth, the form station is ready for assembly, and chainrail parts are almost all made. The trim presses are wired up and ready for the production programs to be installed on Monday. Besides that, we are keeping the CNC machines running around the clock on lots of tooling. Kudos to the guys on the shop floor making it happen, especially to the guys that took on the challenge of manning our second shift.

Here are some more photos showing some of the recent work:

Half of a male mold in the Haas VF6:


A whole rack full of new trim tools:


Those are some LARGE cylinders!


Former frame in the paint booth:


Stay tuned for more updates!

Fritz

Tuesday, March 24, 2009

Getting Closer

Well, the trim presses are almost complete, and the work on the SX-44 thermoformer has begun in earnest. Kurt had one of the trim presses running at 140 CPM last week, that was easily achieved even without any tuning of the servo drive. Pretty impressive. I can't believe how smooth and quiet it ran, but maybe I should not be surprised, as this machine is extremely well built, maybe even over-built!

Here's how things looked in the assembly building last week:


On the thermoformer side, we have completed the form station headers and platens. Frame work is under way, hydraulics will be delivered within a week, and the chain rail extrusion is on order. The electrical panels are coming along nicely, and will be completed with time to spare before we are ready to wire the machine. Here's the platens and headers:


That's all for now. Stay tuned for more updates.

Fritz

Thursday, March 12, 2009

SX-44 Thermoformer Specifications

As promised, here are the preliminary specifications on the new SX-44 thermoformer. Although most of this is finalized, it is possible that some of these specs will vary by the time we are done with the first machine. I will revise the spec sheet once the machine has been built and fully tested, and re-post here.

Dimensions

H: 125” (317 cm)
L: 277” (704 cm)
W: 100” (254 cm)

Weight

8500 lbs (3855 Kg)

Power requirement

225A @ 460-308V 50/60hz

Total power consumption

150-175A Continuous

Control Panel

NEMA 12 / IP55

Air consumption

> 1 CFM @ 80 psi

Cooling requirements

7 Tons

Sheet Width

Maximum: 46” (1168 mm)
Minimum: 34” (864 mm)

Mold Width

Maximum: 42” (1067 mm)
Minimum: 30” (762 mm)

Mold Length

Maximum: 56” (1422 mm)
Minimum: 32” (813 mm)

Mold Height

10” (254 mm)

Forming Depth

Maximum: 3.0” (762 mm)

Speed

Maximum Dry Cycle: 40 CPM

Oven length

Minimum: 136” (345 cm)
Maximum: 168” (427 cm)

Oven zones

8 top
8 bottom

Heater type

Top: Quartz
Bottom: Ceramic Coated Quartz

Oven index

4 shots w/32” mold
3 shots w/56” mold

Cylinder Size

Bore: 8” (204 mm)
Stroke: 4” (102 mm)

Platen Size (Depth)

32” (813 mm)

Hydraulic motor

25 HP

Press capacity

38 Tons

Vacuum pump

5 HP Vane Pump

Temperature Control

On board water cooling. Optional mold temperature control unit.

Chain Drive

15 HP Servo Motor

Transport

#50 Sticker Chain

Width Control

Manual Adjustment

Thursday, March 5, 2009

TP-46 Progress

The TP-46 trim press is coming along nicely. We are in the process of making three of these right now, and they look great so far. Here are some photos:







More updates to come...

Fritz

Tuesday, March 3, 2009

First Post

Welcome to the Commodore Technology blog! We will be using this forum to keep you up to date on the latest happenings here at Commodore.

It has been a busy start for us here in 2009. So busy, in fact, that it is hard to believe that it is already March. We're anxiously awaiting the return of warmer weather here in New York, but it looks like it might be a while. This morning it was 9°F (-13°C) outside, which sure does not feel like spring!

Our current focus is the development of the latest additions to our product line, the SX-44 thermoformer, and the TP-46 trim press. These products represent our entry in to the arena of wide-web thermoforming. This new equipment will be designed and built using the same philosophy that Commodore has always embraced - simple, reliable, well built equipment that provides you with the best return on investment in the industry. Keep an eye out for more information and photos as this new equipment is being built over the next few months.

Speaking of simple, reliable equipment, the first member of the SX family, the SX-16, was delivered to one of our valued customers earlier in 2008. This thermoformer and trim press combination has already proven to be an exceptional performer, so much so that our customer has already ordered another one for delivery this spring.

I will post some specifications of the SX formers soon, but in the meantime, take a look at the video footage of the SX-16 below.



Thanks for reading!

Fritz Seager
Operations Manager
Commodore Technology